Plasma Surface Treater (Small Head)

Plasma Surface Treater

OVERVIEW

Plasma treaters produce plasma surface treatment to promote the adhesion of inks, adhesives, coatings, sealants & paints. It could also clean the surface with ideal neat and tidy areas. The manufacturers or factories integrate in-line plasma treatment equipment to enhance adhesion on plastics, composites, metals & glass surfaces. The plasma pretreatment process cleans, etches, functionalizes surfaces to activate bonding areas by increasing wettability and surface energy. 

This plasma surface treatment could make the surface of the products easier to make the printing, painting, adding glue, cleaning, welding etc..

Winda Plasma Surface Treatment Machines provide industrial manufacturers in the assembly, printing & decorating industries with repeatable adhesion process control. In many cases plasma surface treatment eliminates the need for hazardous primers and inefficient manual surface preparations.  

MAIN FEATURES

1. The surface treatment is fast and reliable.

2. The well-distributed plasma beam ensures the even and stable surface treatment.

3.  It is low cost and environmental pre-process for the products.

4.  It could purge the material surface chemicals, organic contamination, and it could clean the dust on it too.5. The treatment is better than water clean or CO2 clean system because no additional material cost. And compare with sand blasting, it could process the whole material structure, not only the projecting forward part. 

6. The plasma treatment could be integrated with the product production line, no need pre-process. 

7. Reliable system: the machine could self-check after startup, it monitors all the working process and parameters. It has the warnings and protection functions.

8. The machine interface is easy to adjust and set the parameters and check the system. The machine could be work in alone mode or in-line mode. It has the RS485 communication port, so the machine could be remotely controlled.

9. The treatment energy density could be adjustable according to the material speed.

10. The plasma machine nozzle could be customized according to the products or working environments.

Application Examples

1.  Adhesives bonding: Plasma treating activates surfaces to enable better adhesive bonds with plastics, composites, glass and metals. These in-line pretreatment technologies are green processes that improve bond strength and product quality, increase manufacturing efficiencies, and eliminate hazardous primers and manual surface preparation methods.

For example: package boxes wrapping, after plasma treatment, the different types of wrapping materials like overlay paper, light paper, PP, PET and so on, they will be much easier to attach on the package boxes, no bubbles and last for long time.

Surface treaters are used with a wide variety of glues & adhesives including pressure sensitive, spray adhesives, cold glue, thermosetting hot-melt, and curable adhesive formulations.

2. Electrical potting: 

To protect electronics from shock, vibration, and environmental elements, including liquids and caustic substances, manufacturers will often use a potting compound in an electrical housing. Solid or gelatinous compounds such as thermosetting plastics or silicone rubber gels encapsulates the electronics for added protection.

In many cases the housings are made from a nonporous low surface energy plastic such as ABS, Polyamide, or other thermoset plastics. Plasma and flame surface treaters pretreat the interior of the housings to remove surface contaminants, micro etch the surface and increase surface energy to enable adhesion of the potting compound to the enclosure.

3.  Wire & cables Manufacturers: Atmospheric plasma treaters are enabling manufactures to switch to ink jet printing from traditional marking methods such as hot stamping and print wheels. Economical ink jet printing is a non-contact printing process which supports high line speeds & fast changeovers. Changes to wire marking content are handled electronically and can be database driven.

Materials with low surface energy, including PE, PVC, PP, PTFE, XLPE, ETFE, FEP, EPDM, Silicone and more have difficulty bonding with inks. Plasma treatment activates these surfaces to improve wettability and bonding properties. This process creates indelible printing providing excellent abrasion and smudge resistance.

SPECIFICATIONS